Heating tapes are important to use in water pipes to maintain a certain temperature in it.There are tons of heating tapes for water pipes in the market today, but here are four of the best heating tapes for water pipes that you can get.
Disclaimer: this heating cable with tape will not turn on unless it is not in a cold environment. The temperature should be below 37 degrees Fahrenheit for this heating tape for water pipes to work. This is ideal for plastic and metal water pipes installed in your home or office building.
You may use this heating tape for inlet pipes, drain pipes, palm tree frost protein, sewers, and other pipes in or outside your house. The heating cable is self-regulating and it also automatically adjusts and turns on when placed in ambient temperature.
This is pre-assembled and it is easy to install in your water pipes. This package comes in with a thermostat and an instruction guide for you to follow when installing it. It is ETL approved and has an industrial grade heat shrinkage tube for connection.
Simply uncoil the cable, plug it in the heating cable, and then put the thermal part of the cable in an ice bucket for a few minutes. When the temperature is below 37F, the thermostat will start to work and charge the cable.
This pipe heat cable for water pipes come in with a heating tape in the package that is ideal for your water pipes at home or an office building. The cable measures about 18 ft. long in length with a power rating of 7watts.
This heat cable keeps water flowing down to -40 degrees Fahrenheit. It is best to use for both metal and plastic pipes as well. This heating water tape and pipe is manufactured by Frost King.
This heating tape can withstand any weather when taped in your water pipes. It is made and manufactured in China and it is guaranteed safe and sturdy to use. It is also easy to use, highly durable and can be applied to a cable wire for the pipe to unfreeze the water pipes.
The tape measures about ½-inch by 30-foot application tape, freeze-free, and the package comes with a cable and pipe tape.
This water pipe tape insulated hot and cold pipes and you can use them whenever you like in any season. You don't need to wear hand gloves or masks when using this piper water insulation because it is easy to install on pipes.
It is made of fiberglass-free material so you can easily install this by hand without irritating your skin. However, this insulation tape should not be used in heat cables. The measurement of this water insulation for hot and cold pipes are 3 inches wide and 1/11-inch thick, and 25 feet long.
Check out more amazing products on Amazon.
BOOMSbeat writes about stuff we think you'll like. We have affiliate partnerships and may earn commission from any sale resulting from this page.